Automotive Interior Pressure Sensitive Adhesive Hot Melt Yellow Color

Product Categories

Zhejiang Good Adhesive Co., Ltd

Contact Now

Automotive Interior Pressure Sensitive Adhesive Hot Melt Yellow Color

Name: Automotive Interior Pressure Sensitive Adhesive Hot Melt Yellow Color
Brand: Good Adhesive
Price: 1 USD

Automotive Interior Pressure Sensitive Adhesive Hot Melt Yellow Color Manufactures

Brand Name : Good Adhesive

Model Number : YD-5S

Certification : SGS, CTI

Place of Origin : CHINA

MOQ : 1000kgs

Payment Terms : L/C, T/T, Western Union

Supply Ability : 500 tons per month

Delivery Time : Within 15 days after order confirmed

Packaging Details : 20kgs/net carton inner pad waterproof plastic bag

Price : Negotiable

Material : Synthetic polymer resin

Appearance : Yellow

Soften Point : 130±10℃(GB/T15332-1994)

Viscosity(180°C) : 4500±700mpa.s(HG/T3660-1999)

Peeling Strength(180°) : ≥70N/2.5cm(GB/T2790-1995)

Shape : Block

Contact Now

Automotive Interior Pressure Sensitive Adhesive Hot Melt Yellow Color

YD-5S

SPECIFICATIONS

Material	Synthetic polymer resin
Appearance	Yellow block
Soften Point	130±10°C (GB/T15332-1994)
Viscosity(180°C)	4500±700mpa·s (HG/T3660-1999)
Peeling Strength(180°)	≥70N/2.5cm (GB/T2790-1995)
Valid Time	12 months(indoor, unexposed to the sunlight, not more than 40 degree)

APPLICATION

For automobile interior decoration,such as trunk mat,carpet,etc.

SUGGESTIONS

1. Should be applied by 2-component spray gun.

2. Coverage: depending on the porosity of substrates, test is needed.

3. Substrate surface should be dry and oil or grease free.

4. Contact: Immediately after the application

5. Open time: Approx. 10 ~ 20 min.

6. Assembly: Pressure may be needed by manual or mechanical methods to enhance the initial bonding.

7. Final bonding strength test: 2 to 24 hours after bonding assembly, make sure the bonded adhesive is

fully cured and dried.

Properties:

Great sealing performance

Excellent aging-resiatance

Mainly for pocket air filter

Hot Melt Pressure Sensitive based Hot Melts are tacky to the touch at room temperature and are widely used in the labeling industry. These hot melts are also commonly used in tape manufacturing, diaper, feminine hygiene and bottling industries.

Advantage:
1. Own factory, imported raw materials
2. Own lab, R&D team, customized products available
3. OEM/ODM available
4. Free samples
5. Agent supported

Product Tags:

industrial hot glue

industrial strength hot glue

Automotive Interior Pressure Sensitive Adhesive Hot Melt Yellow Color Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Zhejiang Good Adhesive Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!